Produkty dla z torebką (66)

Suitable for all types of neutral or printed film (preferably with antistatic treatment) or tubular polyethylene with thickness from 0.06 mm to 0.13 mm or tubular polypropylene with from 0.03 mm to 0.05 mm thick, and cartene normal or high density. Furthermore, with the FP BAG EVO it is also possible to use expanded polyethylene (FOAM) in tubular reel with a maximum thickness of 1.5 mm. It can use reels with a width of 80-300 or 100-500 mm without disassembly of parts or changing settings. The packaging machine automatically perform the forming of the bag with the upper opening. The filling of the bag and the subsequent closing can be done manually by an operator who starts the cycle of the machine through a button, or automatically by means of feeders, manipulators, weighers. The reel change takes a maximum of thirty seconds. The machine cycle time for the preparation of a bag 200 mm long is about four seconds. Example model:FP BAG EVO 300.1 Film reel width:mm 80-300 Reel external diameter:max. mm 350 Reel maximum weight:kg 15 Bags lenght:mm 25-999 Production:10-20 pieces/minute (depending on the length) Usable film:tubular polyethylene thickness from 60 to 130 microns Usable film:expanded polyethylene with a maximum thickness of 1.5 mm Usable film:polypropylene and HDPE film with thickness from 30 to 50 microns

Impulse sealers MG 820 series, with 820 mm sealing bar and suitable for sealing polyethylene, pvc and polypropylene bags. They have a special timer for adjusting the sealing time based on the thickness and type of material. The MG sealers are complete with a manual cutting unit for the trimming of the sealed bags and/or the creation of bags from tubular reels (if the machine is equipped with a roll holder). The sealers bars must be closed manually by the operator and are automatically held by a magnet until the end of the cycle. There are special supports with mechanical pedal, for the manual sealing machine and with electric pedal for the sealing machine with motorized bar closing. Available models: MG 820: bench sealing machine with manual closing of the bars MGMI 820: bench sealing machine with motorized bar closing and electric pedal Model:MG 820 Max. seal length:mm. 820 Seal width:mm. 5 Power:900W Dimensions:cm. 96x20x27 Weight:Kg. 26

WHEELED VACUUM PACKAGING MACHINE DZ 400 2E WITH TWO SEALING BARS Wheeled vacuum packaging machine with two lateral sealing bars, made of stainless steel (AISI 304) and equipped with volumetric electronic sensor that enables the continuous vacuum control. Tank with with rounded lid for greater usable height in the central part. The compact size of the tank and the high power of the vacuum pump ensure high productivity. The adjustment of the welding time, vacuum and gas placing occur through practical potentiometers positioned frontally. VACUUM MACHINE WITH GAS INJECTION SYSTEM (MAP) Each sealing bar is equipped with two nozzles which introduce gases in different quantities, so the machines are suitable for the packaging of one single use for each sealing bar. When ordering, it is possible to request a modification to the gas inlet system so as to be able to pack two bags per bar by entering the same quantity of gas for each package. Sealing bars length:mm 400 Chamber dimensions:mm 320x420 Chamber height (tank + cover):mm70/130 Vacuum pump:20 m3/h Work cycle:about 30 sec Sealing bars:2 lateral

CF SERIES - CONSTANT TEMPERATURE HEAT SEALERS WITH PEDESTAL AND FOOT PEDAL ( for multi-layer bags) THE CF SERIES of constant heat sealers with pedestal and operated by foot pedal, are ideal for sealing bags made of compunds, multi-layer films, co-extruded films, OPP, heat-sealable cellophane. It is not suitable for polyethylene films. Being operated by foot pedal, the hands are free to feed the machine. The sealing jaws of the type "hot bar" are equipped with resistance and temperature controller for controlling the temperature from 30 ° C to 200 ° C. The temperature of the sealing jaws is adjustable according to the type and thickness of the material to be sealed, and is kept constant by a heat thermo-regulator. The maximum sealable thickness, that always varies according to the type of sealable material, is 0.25 mm. (50 mm. total). Also available in CFN version with timer and acoustic signal at the end of sealing. Example model:ME 300 CF seal length:mm. 300 Seal width :mm. 14 Height of sealing bars from the ground :mm. 800 Type of bars:Cross serrated Sealable material:PP-AL/PE Power supply:220Vv

Table top sealer with electric foot pedal and impulse seal suitable for the closures of envelopes in heat-sealable plastic material such as polyethylene, polypropylene, PVC, etc. The foot pedal with magnet hold downd closure, allows the operator to have both hands free. Simple to use and does not require preheating.

BAG OPENER - BAGS OPENING DEVICE The Bag Opener is an opening device characterized by a regular and silent motorized fan and is designed to quickly pack and fill the bags. It consists of a stainless steel body suitable for contact with food and easy to clean. The bags with a hole for hooking are very easy to change and the constant air flow opens them easily one after the other. Fan with two-speed motor and on/off switch. Adjustable guides to facilitate filling. Attention: the collection of the bags takes place by tearing (naturally a small piece of bag will remain torn off). Airflow:550 l/min Power :50W Usable bag width :Max. 400 mm - Min. 160 mm Usable bag lenght :Max. 600 mm - Min. 200 mm Maximum recommended thickness :50 micron (0.05mm) Dimensions (mm) :400x675x150